Search by Hazard
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tool (“Tool”) is intended to assist in choosing protective clothing styles for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment (“PPE”), such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required. Supplying the proper hazard/chemical and exposure information for your hazard scenario is critical in order to obtain suggestions of possible garment options for your consideration. Inaccurate information could result in improper suggestions. Since there are other factors involved which could affect the final PPE decision and may not be considered in this Tool, the final decision on protective clothing selection is the responsibility of the buyer, safety professional, industrial hygienist and end-user. DuPont de Nemours, Inc. or its affiliates DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR ANY INFORMATION OR SUGGESTIONS PROVIDED BY THE TOOL OR THE USE THEREOF.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will be unsuitable. It is the responsibility of the user to review available data and verify that the garment selected is appropriate for the intended use and meets all specified government and industry standards.
Search by Hazard
-
1 Choose Hazards
1 Enter
Chemicals -
2 View Permeation Data
2 View
Data -
3 Enter Exposure Details
3 Enter
Exposure -
4 View Matching Products
4 View
Products
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical or Other Hazard Name
or
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Important Note
The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials or additives or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.
Hazard Concentration information
Please read following
- You have selected a chemical that has been tested at multiple concentrations. All concentrations will be displayed on the next page so that you can review breakthrough times for each concentration.
- Please review FAQs if your hazard concentration is lower or higher than the tested concentrations
Need Help?
- If you see your CAS number in the drop down list, make sure you are selecting the hazard from the drop down list before clicking "Add to List".
- If you do not see your CAS number listed, check the number and try again or you may want to try Guide.
CHEMICAL COMPARISON
Done
Done
Done
Hazard Scenario
SAVE SCENARIO
Please select a title for easy identification of the scenario you want to save
PLEASE NOTE:
All of the saved scenarios are going to be active only for 90 days.
You can save it again from the Saved Scenarios section from the Product Selector "Saved Scenarios" section from the Product Selector
SAVE SCENARIO
Refine Search
Clear AllFlammable Environments
Glove length required?
Elbow and shoulder length protection will require a sleeve or garment in addition to a glove. Do you want to:
No current Tychem® gloves can be used in situations requiring FR PPE
You may select one to five chemical classes and sub-classes that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical class and sub-class if you wish to find the best possible product match for that chemical class.
Chemical Class Name
Chemical Sub-class Name
| Class Name | Sub-class Name | Actions |
|---|
Step 1 of 2
You may select one to five fabrics to view and compare permeation data for all chemicals in our database.
Fabric Name
| Fabric/Materials | Actions |
|---|
You may select one to five particle or biological hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single hazard if you wish to find the best possible product match for that one hazard.
Particles or Biological Hazards
| Chemical Details | CAS | Actions |
|---|